Lighting

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

- High power 20 lux LED light, more than 50,000 hours life span - Integrated retro reflector to be better seen by oncoming traffic - Compatible with 6-12V E-bike battery - Optimal light distribution by our double lens technology - Clear lens technology, you are also visible from the side - Compact, sportive design - 80g

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs

Local 75 Front Light - 2 bright LEDs push out 75 lumens - 3 beam modes let you adjust light intensity and battery -runtime for your rides - Clear silicone side bezel amplifies side visibility on all sides - Flexible, silicone mount fits all handlebar diameters - Tool free battery door allows for easy battery replacement - Built to the ANSI FL-1 standard, which provides consistent light performance measurement guidelines - 3 modes: High: 75 lumens, Low: 40 lumens, Blackburn Strobe: 40 lumens - Runtime: High: 25 hrs, Low: 44 hrs, Strobe: 98 hrs - Plastic injection body - 3xAA replaceable batteries Local 10 Rear Light - Large lens power button is easy to turn on/off while pedaling or wearing gloves - Silicone mount, one size fits all - Built to the ANSI FL-1 standard, which provides consistent -light performance guidelines and measurements - FL-1 ANSI Standard - 10 lumens - 2 modes: High: 10 lumens, Steady Flash: 10 lumens - Runtime: High: 70 hrs, Steady Flash: 140 hrs - Replaceable AA batteries

Looking for a light set that is simple, affordable and bright? The Dayblazer 550 and Click USB Light Set is just the ticket. BIG LIGHT SET. SMALL PRICE. The Dayblazer 550 features our BLITZ daytime running mode, versatile mounting options, and excellent side visibility. The Click USB rear light packs 20 lumens of light in a tiny package. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 550 lumens front, 20 lumens rear - Country of Origin: China - Recharge Time: 3-hour recharge - Mounting Options: The versatile silicone swivel mount allows the light to be adjusted to center on the road. Fits handlebars 22–35mm and can be used to strap to some helmets. (front)/Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter (rear) - Weight: 81 grams (front 59g, rear 22 g) Run Time : - Blitz mode (front): 1 hour at 550 lumens - High mode (front): 1.5 hours at 275 lumens - Low mode (front): 5 hours at 75 lumens - Pulse mode (front): 5.5 hours at 100 lumens - Strobe mode (front): 12 hours at 65 lumens - High mode (rear): 1.5 hours at 20 lumens - Strobe mode (rear): 3 hours at 20 lumens Water Resistance: - IP-67 (front) and 65 (rear) submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. Both lights are totally protected against dust/grit. The front light meets the IP-67 Standard, which means that it is fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes. The rear light meets the IP-65 Standard, which means it is protected against low-pressure water jets from any direction.

A distinctive copper-coloured white LED front bicycle light can be quickly attached to the frame, handlebars or seat post with a simple rubber band and clip that won't damage painted or polished surfaces. Removed easily to prevent theft. Small enough to stow in your pocket, bright enough to ensure you remain visible to other road users after dark. Choose between constant illumination or four different flashing modes. Anodized body with laser etched Brooks logo. - Includes 2 x CR2032 batteries

A distinctive copper-colored red LED rear bicycle light can be quickly attached to the frame, handlebars or seat post with a simple rubber band and clip that won't damage painted or polished surfaces. Remove easily to prevent theft. Small enough to stow in your pocket, bright enough to ensure you remain visible to other road users after dark. Choose between constant illumination or four different flashing modes. Anodized body with laser etched Brooks logo. Includes 2 x CR2032 batteries

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Updated and more secure clothing clip for mounting CatEye safety lights.

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.

CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Small, compact, bright, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

Small, compact, quick and easy - there's no reason not to grab a Cateye ORB for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells

Small, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

100 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (100 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Two light modes (Constant / Flashing) Run time: - Constant mode 100 lumens:approx 3.5hrs - Flashing mode 100 lumens:approx 35hrs

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

Super bright and compact, Cateye's Omni 3 Front and Rear Safety Lights use CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Let everyone know you're coming with CatEye's Omni 5 Front Light, which uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Small, compact, quick and easy - there’s no reason not to grab a pair of ORB’s for your next ride. MODES / RUN TIME: - Rapid Flashing Mode: 100 Hours - Constant: 50 Hours Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm

Small, compact, quick and easy - there’s no reason not to grab a pair of ORB’s for your next ride. MODES / RUN TIME: - Rapid Flashing Mode: 100 Hours - Constant: 50 Hours Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm